Best Camera Mounts: 10 Flexible Options for Rigs, Monitors and Action Cameras in 2026

The best camera mounts depend on what you need to attach and where you need to place it, from a monitor on a cage to an action camera on a handlebar. These picks cover clamps, articulated arms, monitor holders and rig components, so check compatibility, mounting points and load limits before choosing.

Quick Top Products

Quick Desk and Rod Clamping

SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138

The SmallRig 1138 combines a super clamp with a dual ball head and a 1/4-inch-20 screw, giving you a way to position a camera, monitor, light or microphone on a rod, tube, table or frame. Its locking knob secures the clamp, while the ball head lets you adjust the attached gear.

The aluminum and stainless steel construction is paired with a stated 1.5 kg support limit. An action camera mount adapter is included.

This is a flexible option for a fixed tabletop or vehicle setup, though dynamic use calls for a safety rope, and the jaws need a suitable surface to grip.

Best For: Creators who need to attach a camera or accessory to a desk, rod or tube.

Choose this clamp if you want one mount that can move between a desk, rod or tube and can hold different camera accessories. Its included adapter is useful for action cameras, while the 1/4-inch-20 connection broadens its use to other gear.

Check the available surface and the 1.5 kg limit before mounting; for filming while moving, account for the safety-rope guidance.

Check Price on Amazon

Long Reach with Dual Threads

SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes

This kit pairs a super clamp with a 9.8-inch articulating arm, giving accessories room to sit away from the support surface. The clamp includes 1/4-inch and 3/8-inch threads, and its jaws open from 15 mm to 54 mm.

The arm has 1/4-inch screws at both ends and double ball heads that rotate 360 degrees, which helps when adjusting a monitor, microphone or light. Rubber cushions line both the clamp and arm.

It is a practical choice for a rig that needs reach and angle adjustment, but the supplied notes do not give a load limit, so check the intended accessory's weight before use.

Best For: Filmmakers positioning a monitor, microphone or light away from a clamped support point.

Pick this kit when reach is important: its 9.8-inch arm can place a monitor or light farther from the clamp than a compact ball-head mount. The 360-degree joints add positioning options, while the jaw range helps determine whether your support fits.

Since a maximum load is not provided, verify the weight and balance of the accessory before attaching it.

Check Price on Amazon

Cushioned Cold-Shoe Monitor Holder

SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346

The SmallRig BSE2346 attaches a field monitor to a camera or other mounting system through a cold shoe adapter. A bottom 1/4-inch-20 screw secures the monitor, and the holder provides 360-degree horizontal swivel plus 140-degree vertical tilt.

Its rubber cushions add contact protection, and the CNC-machined aluminum mount is specified for monitors up to 1.2 kg. A hex spanner is included for tightening.

This mount fits a straightforward on-camera monitoring setup, with a defined screen-size range and useful angle adjustment. Confirm your monitor's weight and connection before buying, since the supplied details describe the holder for 5-inch and 7-inch monitors.

Best For: Camera operators mounting a 5-inch or 7-inch monitor on a cold shoe.

This is a focused choice for a small field monitor mounted on a cold shoe. It combines broad swivel with a stated 140-degree tilt and a 1.2 kg maximum recommendation.

Check the monitor's screen size, weight and 1/4-inch-20 connection; if your rig instead needs an ARRI locating connection or a clamp around a support, choose a mount designed for that interface.

Check Price on Amazon

ARRI Locating Support for Portrait or Landscape

SMALLRIG Adjustable Camera Monitor Mount with 3/8"-16 Locating Screw for ARRI, 360° Swivel and 180° Tilt, Anti-Twist 1/4" Locating Screw, Horizontal & Vertical Shooting

The SmallRig 6314 is designed for monitors attached to a cage, top handle or other support through a bottom 3/8-inch-16 locating screw for ARRI. Its top retractable 1/4-inch-20 locating screw and locating pins help resist monitor twist, while a silicone pad protects the contact surface.

It tilts 180 degrees and pans 360 degrees, and supports both horizontal and vertical monitor orientations. A thumb knob adjusts tilt damping for devices of different weights.

The aluminum alloy and stainless steel construction suits a compact camera rig. Check that your support has the matching ARRI locating hole and that the monitor uses the supported top connection.

Best For: Video crews mounting a monitor to a cage or handle with an ARRI locating hole.

Choose the 6314 when the cage or handle has an ARRI locating hole and you want both portrait and landscape monitor placement. Its 180-degree tilt and damping adjustment support angle changes without changing the base connection.

Confirm the locating-hole pattern and monitor-side screw or pin compatibility, and check load suitability because a maximum monitor weight is not provided.

Check Price on Amazon

ARRI-Style Mount for 5- and 7-Inch Screens

SmallRig Adjustable Camera Monitor Mount for ARRI-Style (Upgrade), 360° Swivel and 180° Tilt Monitor Holder Anti-Twist Support 5” and 7” Field Monitor

This SmallRig upgrade mount attaches a 5-inch or 7-inch monitor through a screw mount and connects to a camera cage or other support with an ARRI locating screw. The top uses locating pins and a silicone pad to help resist twisting and scratching.

Its knob tightens the mount, and the holder can tilt 180 degrees and swivel 360 degrees. The notes give different load capacities at different tilt angles, so the supported weight depends on how the monitor is positioned.

Check those angle-specific limits against your setup, along with the cage's ARRI connection, before choosing this mount.

Best For: Operators who need a quick-tightened ARRI-style monitor holder with angle adjustment.

This is a useful option when an ARRI-style base is already part of your rig and you want quick angle changes for a 5-inch or 7-inch screen. Its load figures vary with tilt, which makes setup position a real buying and installation factor.

Check the capacity for your planned angle and confirm the cage offers the matching locating point.

Check Price on Amazon

Compact Standalone Super Clamp

SMALLRIG Super Clamp with 1/4 and 3/8 Thread for Cameras, Lights, Umbrellas

This standalone super clamp mounts to supports such as hooks, shelves, plate glass, crossbars or other clamps. Its jaw opening spans 15 mm to about 40 mm, and rubber pads help prevent slipping and scratching.

The body has 1/4-inch and 3/8-inch threaded holes for attaching accessories such as a ball head or magic arm. Made from aluminum alloy and stainless steel, it is the simplest option here when you already own the arm or head you want to use.

The clamp itself does not include those positioning accessories, so check what your camera or accessory requires before ordering.

Best For: Photographers who need a basic clamp for attaching compatible accessories to a narrow surface or rod.

Pick this model if you want a compact clamp and already have a compatible ball head or magic arm. Its 15-to-40 mm jaw range gives a clear fit check, and the 1/4-inch and 3/8-inch threads broaden accessory choices.

It is less complete than a clamp-and-arm kit, so account for any additional parts needed to position the camera or monitor.

Check Price on Amazon

Anti-Twist Arm for Cage Accessories

SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins

The 11-inch SmallRig 5311 combines a crab-shaped clamp with a magic arm and a 1/4-inch-20 screw with retractable pins at the accessory end. The pin design helps resist twisting, while the clamp fits tubes, tables, tripod legs or stabilizer rings measuring 15 to 40 mm in diameter.

A single wing nut loosens or locks the ball joints together for repositioning, and anti-slip pads protect the contact points. The maximum payload is 1.5 kg.

This gives creators room to position an action camera, monitor, light or microphone, but confirm both the clamp fit and accessory load before mounting.

Best For: Vloggers and filmmakers who need to clamp a camera accessory to a 15–40 mm support.

Choose the 5311 when you need an 11-inch reach and an anti-twist attachment for an accessory on a rod, table edge or tripod leg. The 1.5 kg limit and 15-to-40 mm clamp range are central fit checks.

Its one-wing-nut adjustment is convenient for repositioning, while a heavier monitor or a larger support may call for another mount.

Check Price on Amazon

Shorter Anti-Twist Arm for Compact Rigs

SMALLRIG 7 Inches Magic Arm Clamp, with 1/4 Screw & Anti-Deflection Pin

The SmallRig 5310 uses the same general combination of a crab-shaped clamp and pin-equipped 1/4-inch-20 accessory connection in a 7-inch arm. Its clamp fits supports 15 to 40 mm in diameter, and the maximum payload is 1.5 kg.

Retractable pins help resist twisting, anti-slip pads protect the clamped surface, and the wing nut loosens or locks the ball joints together. Compared with a longer arm, this shorter reach keeps an accessory closer to its support point.

Check that the shorter extension gives your monitor or camera enough clearance and that the clamp fits the chosen support.

Best For: Creators who want a more compact clamp arm for a monitor, light or action camera.

Pick the 5310 for a compact rig where a 7-inch arm can place an accessory close to the clamp. The anti-twist pin connection and 1.5 kg payload support small monitors, lights and action cameras.

Check clearance and support diameter first; this compact format may not provide enough reach for your setup.

Check Price on Amazon

Handlebar Clamp with Motion Limits

SMALLRIG Camera Mount Clamp, Gopro Motorcycle and Bike Handlebar Mount Kit

This SmallRig clamp is built around handlebar and support mounting, with 1/4-inch-20 and 3/8-inch-16 threaded holes plus a removable action camera adapter. Its jaw accepts a rod from 14 mm in diameter or a surface up to 65 mm thick, and the 360-degree ball head supports portrait or landscape framing.

Anti-slip cushions help protect the accessory and improve the clamp's grip. Motion use has specific restrictions: the maximum device weight is 350 g, rough terrain should be avoided, a safety cord is advised and the speed guidance is below 50 km/h.

Treat those conditions as essential fit checks for riding footage.

Best For: Action-camera users mounting a compatible camera to a bike or motorcycle handlebar within the stated motion limits.

Choose this mount when the main job is attaching a compatible action camera to a bike or motorcycle support. Its large jaw range and removable adapter make it adaptable, but motion use has a much lower device limit than the 7.7 lb at-rest figure.

Follow the 350 g motion guidance, use a safety cord, and check handlebar fit and route conditions before filming.

Check Price on Amazon

Height-Adjustable Desktop Camera Stand

SMALLRIG Camera Mount C Stand, 15"-35" Adjustable Desk Clamp Table Tripod

The SmallRig 3488 combines a desk C-clamp, three extending pole sections and a 1/4-inch ball head for a tabletop camera or light setup. Its height adjusts from 19 to 39 inches with the ball head and clamp, and the head allows 360-degree rotation plus a tilt range of -90 to +45 degrees.

The stated maximum load is 3 kg. The desk clamp fits tables up to 4.7 cm thick, and the aluminum stand weighs 430 g.

A ring light adapter is also included. This freestanding desk option takes more vertical space than a small clamp arm, so measure the desk and desired camera height before choosing it.

Best For: Streamers and tabletop creators who want a height-adjustable camera or light support clamped to a desk.

This stand suits a desk-based camera, phone or ring light setup that needs height adjustment and broad angle control. Its 19-to-39-inch range and 3 kg load figure help assess camera placement, while the clamp's 4.7 cm desk limit is a key compatibility check.

Choose a smaller arm if desk-edge clearance or a lower profile matters more than extended height.

Check Price on Amazon

How to Choose Camera Mounts

How We Picked Camera Mounts

We prioritized products that attach a camera or useful filming accessory to a clear support point: a desk, rod, handlebar, cold shoe, cage or tabletop. The selection includes standalone clamps for existing rigs, articulated clamp kits for repositioning, dedicated field monitor holders and a height-adjustable desktop stand.

We excluded camera cages, handles, rod blocks and battery holders where the core job is building or powering a rig rather than mounting a camera or accessory.

The most useful fit details vary by mount type. Clamp buyers should compare the support diameter or thickness with the jaw range.

Monitor buyers should check the mounting interface, screen size and supported weight. For moving camera mounts, the motion-specific limits matter more than a static load figure.

Comparing Camera Mounts

A standalone clamp such as the SmallRig super clamp is compact and relies on a separately owned arm or head. The 9.8-inch kit adds reach and 360-degree ball joints, while the 7-inch and 11-inch crab-clamp arms combine a support clamp with a pin-equipped accessory connection.

Their shared 1.5 kg payload makes them suited to smaller accessories, with reach and support fit determining which is more practical.

Monitor mounts trade broad positioning for specific interfaces. The BSE2346 uses a cold shoe and supports 5-inch or 7-inch monitors up to 1.2 kg.

The ARRI-style models connect through locating points and support portrait or landscape use; the upgraded mount's load capacity varies by tilt angle. Check whether your cage offers a cold shoe or ARRI locating point before choosing.

A desk C-stand serves a different purpose from a compact clamp arm. It raises a camera or light from the tabletop and provides a 19-to-39-inch height range, but it requires a suitable desk edge.

Handlebar use is its own category: the 4102B guidance limits moving devices to 350 g and calls for a safety cord and smooth terrain.

Choosing a Camera Mount for Your Rig

Start with the support surface. A clamp designed for 15-to-40 mm supports cannot be assumed to fit every desk edge or handlebar, while a cold-shoe mount needs an available shoe and a 1/4-inch screw connection for the monitor.

For a table-mounted camera at standing height, the adjustable C-stand gives more reach than a short articulated arm, provided the table edge fits its clamp.

Next, consider how much angle adjustment you need. Ball heads rotate freely for framing, while monitor mounts offer specified tilt and swivel ranges.

If the monitor is mounted vertically or at a steep angle, use the product's stated limits for that position rather than assuming the same capacity applies at every angle. Retractable locating pins are useful when the accessory needs added resistance to twisting.

Who Should Buy Which Camera Mount

Choose a standalone super clamp if you already have an arm or head and need a simple attachment point. Pick an articulated clamp kit when positioning flexibility or reach matters, and select a shorter arm when keeping an accessory close to its support.

For on-camera monitoring, match the mount's cold-shoe or ARRI interface to your cage and confirm monitor size and weight.

For streaming, interviews or desk recording, a height-adjustable stand offers a camera or light support above the work surface. For bike footage, select the handlebar clamp only when its motion restrictions fit your device and riding use.

The right camera mount is the one whose connection, support range, adjustment and load guidance all match the actual rig.